 |
The SpinStudio Mainboard is the base of the SpinStudio system. It contains the necessary power regulation circuitry and handy connections for peripheral modules, as well as an on board EEPROM socket, crystal, and programming header.
*** Includes an EEPROM and DIP Propeller!
note - you will need your own PropPlug™ and power supply, see documentation for more information. |
View Documentation |
Available now!
Includes 1 Propeller Chip
$34.99
|
 |
The SpinStudio ADC adapter incorporates a MCP3208 ADC into a easy to use, plug-in module for the SpinStudio system. The MCP3208 is a very capable ADC with 8 channels and 12 bit resolution. The maximum sample rate (when using 5V max sample voltage) is 100K samples/second. A selectable jumper allows use of 3.3V or 5V as the maximum sample voltage, allowing measurements from either 0 - 5V or 0 - 3.3V in 4096 increments. An SPI interface is used for data transfer. Possible applications for this module include Data-logging and Sensing, Robotics and Industrial control. |
View Documentation |
Available now!
Price $12.99
|
 |
The SpinStudio Game Stacker
The SpinStudio Stackers series of modules combine multiple single modules into 1 convenient plug-in assembly. The Game Stacker contains all requisite components and connectors to support composite video, stereo sound, SD card, Keyboard, Mouse, RGB LED and 2 NES compatible controller jacks.
It provides an ideal platform for game development for the Propeller or a micro-computer application running a version of Basic or an Operating System.
* SpinStudio MainBoard required for use and not included *
|
View Documentation |
Available now!
Price $34.99
|
 |
Propeller P8X32A-D40
- Package Type = 40-pin DIP
- Processors (cogs) = Eight
- Architecture = 32-bit
- System Clock Speed = DC to 80 MHz
- Power Requirements 3.3 volts DC
- Clock Modes = (a) External crystal 4 -8 MHz (16 x PLL) (b) Internal oscillator ~12 MHz or ~20 kHz (c) Direct drive
- Global RAM/ROM = 64 K bytes; 32 K RAM / 32 K ROM
- Cog RAM = 512 x 32 bits each
- I/O Pins = 32 (simultaneously addressable by all eight cogs)
- Current Source/Sink per I/O = 50 mA
|
View Documentation |
Available now!
Price $7.99
|
 |
The Prop Plug provides a USB-to-serial port connection that is convenient for microcontroller programming and communication. These tiny devices are capable of asynchronous communication at up to 3 M baud with both 3.3-volt and 5.0-volt devices such as the Propeller and BASIC Stamp. The Prop Plug slips onto a 4-pin, 0.1" spaced header, allowing both PCB's and breadboards to provide in-circuit programming capability Note: USB A to Mini B Retractable Cable is included |
View Documentation |
Available now!
Price $24.99
|
 |
PropNIC,
a Network interface card for your Propeller!
This module
utilizes
the popular ENC28J60 IC.
It makes it simple ethernet support to add to ANY Propeller
development setup. Users of other Microcontrollers can also take
advantage of it's simple connection to the ENC28J60's SPI
interface. It can be used with a solderless breadboard,
Parallax Propeller Proto Board, The Propeller Education kit, SpinStudio
or any other existing or future prototyping setup.
All parts needed for assembly are through-hole, making the required
soldering easy!
Links to example/demo code for the Propeller are provided in the
documentation, as well
as on the Parallax Forum and Object exchange. |
View Documentation |
Sold Out!
|
 |
The Propeller SD card adapter combines a SD card socket with the requisite pull up resisters. Only the SD card connections that are important for SPI interfacing are included in the connector. This provides an easy connection to many existing Propeller development setups, including the Protoboard, Propeller education kit and the Demo Board. |
View Documentation |
Sold Out! |
 |
The Audio Video interface board gives the user a composite video and stereo sound output. It is pin compatible with the Demo Board or Proto Board when plugged into Socket B.
The sound output is not amplified, so amplified speakers must be used with this product. |
View Documentation |
Available now!
Price $11.99
|
 |
The VGA interface board gives the user the ability to connect a VGA monitor to the SpinStudio platform. It is pin compatible with the Demo Board or Proto Board when installed in Socket C of the SpinStudio mainboard. |
View Documentation |
Available now!
Price $11.99
|
 |
The SpinStudio NES controller Adapter, this adapter allows a simple connection of a NES style game controller to your SpinStudio development system, modified Protoboard, or other Microcontroller project with a solderless breadboard. Only requires 3 I/O pins (4 for two controllers) plus VDD and VSS.This along with the Audio/Video adapter will allow you to play some of the games currently available on the Parallax™ forums. |
View Documentation |
Available now!
Price $12.99
|
 |
The PropJoy Joystick Adapter, Play games!The PropJoy allows Atari™ style joysticks to be plugged into the 2 supplied connectors. This provides an easy connection to SpinStudio or a modified Protoboard. This along with the Audio/Video adapter will allow you to play some of the games currently available on the Parallax™ forums. |
View Documentation |
Available now!
Price $11.99
|
 |
The SpinStudio XBee Adapter, Communicate wirelessly!
The XBee Adapter Module allows you to plug an XBee into your SpinStudio Main Board or a Proto Board that has be modified for use with SpinStudio modules. You will need 1 XBee adapter and 1 XBee per Propeller that you want to connect wirelessly. XBee is not included. |
View Documentation |
Available now!
Price $11.99
|
 |
The Mouse and Keyboard interface board simply plugs into the Mainboard and instantly adds keyboard and mouse support. It is pin compatible with the Demo Board™ or Proto Board™ when plugged into Socket D. |
View Documentation |
Available now!
Price $11.99
|
 |
The General I/O - servo board gives either direct access to the Propeller's Input/Output pins, or the signal is also routed through a current limiting resistor to a standard 3 pin header for connection of up to 8 servos. Can also be used to connect such devices as a Ping™ ultrasonic distance sensor or Serial LCD. Any combination of devices or direct access can be utilized simultaneously.
External power can be supplied so that Servos can have their own power supply. |
View Documentation |
Available now!
Price $11.99
|
 |
The ProtoCard , Make your own SpinStudio peripheral modules!
The ProtoCard gives you the ability to design and permanently solder together projects that can be easily unplugged when you want to work with a different project, then come back to it later, without having to start again from scratch. The ProtoCard gives you access to 8 of the Propeller IO lines, both I2C lines, 5 VDC, 3.3 VDC and VSS(ground). |
View Documentation |
Available now!
Price $5.99
|
 |
This solderless breadboard mounted Voltage Regulator Module supplies both 5 volt and 3.3 volt from a single wall transformer. A minimum 7 volt supply with a 2.1mm center positive barrel connector is needed to operate. Handy for prototyping circuits that require both 3.3 and 5 volt sources. This Regulator module plugs right into the end of your solderless breadboard and is compatible with most modern breadboards. |
View Documentation |
Available now!
Price $12.50
|
 |
This Serial 4x4 Keypad has a special backpack circuit board that translates key presses on the keypad, and outputs them as a serial stream. Compatible with both 3.3 and 5 volt devices, the serial stream is output at the same level as is fed to the module via VDD. Meaning....you feed it 3.3V, it will output the serial data at 3.3V levels. So no level shifting circuitry is required. Data is output at a fixed rate of 9600 baud. This product is assembled and tested before shipping.
Plugs right into the SpinStudio IO / Servo module!!! |
|
Available now!
Price $14.99
|
